Comparing Media Types

Presented in Table 8-1 are comparisons of the features of the common network media. This chart provides an overview of various media that you can use as a reference. The medium is possibly the single most important long-term investment made in a network. The choice of media type will affect the type of NICs installed, the speed of the network, and the capability of the network to meet future needs.

Table 8-1 Media Type Comparison

Media Type	Maximum Segment Length	Speed	Cost	Advantages	Disadvantages
UTP	100 m	10 Mbps to 1000 Mbps	Least expensive	Easy to install; widely available and widely used	Susceptible to interference; can cover only a limited distance
STP	100 m	10 Mbps to 100 Mbps	More expensive than UTP	Reduced crosstalk; more resistant to EMI than Thinnet or UTP	Difficult to work with; can cover only a limited distance
Coaxial	500 m (Thicknet) 185 m (Thinnet)	10 Mbps to 100 Mbps	Relatively inexpensive, but more costly than UTP	Less susceptible to EMI interference than other types of copper media	Difficult to work with (Thicknet); limited bandwidth; limited application (Thinnet); damage to cable can bring down entire network
Fiber-Optic	10 km and farther (single-mode) 2 km and farther (multimode)	100 Mbps to 100 Gbps (single mode) 100 Mbps to 9.92 Gbps (multimode)	Expensive	Cannot be tapped, so security is better; can be used over great distances; is not susceptible to EMI; has a higher data rate than coaxial and twisted-pair cable	Difficult to terminate